Choosing the Right Stone Exposure Level

When it comes to selecting stone, a range of criteria must be considered: water absorption, strength (compressive and flexural), abrasion resistance and durability. A basic evaluation of these key factors can make all the difference, depending on the intended use of a building. Find out https://northernconcretepolishing.com/

Engineered stone, such as quartzite and sandstone, is popular for its durability and versatility. It can be used indoors for flooring and surfaces, outside as a tile patio, and in the kitchen as countertops. However, engineered stone has higher levels of crystalline silica than natural stone, which increases health risks for workers involved in its fabrication and installation.

The dust from grinding and cutting engineered stone is extremely dangerous. It can cause silicosis, an incurable and disabling lung disease caused by inhaling fine particles of crystalline silica over a long period of time.

Choosing the Right Stone Exposure Level for Polished Concrete

Although OSHA and Cal-OSHA mandate the use of wet methods, respirators, a dust suppression system and other safety protocols to reduce exposure, the reality is that there is no safe way to fabricate artificial stone without inhaling silica. Even when workers follow these protocols, nano-sized silica particles bypass respiratory filters and continue to be inhaled. This continues to put workers at risk of developing silicosis and other lung diseases. If you or a loved one have been diagnosed with a respiratory condition related to working in the stone industry, contact Brayton Purcell LLP to explore your options for compensation.

Concrete Polishing Of Northern Colorado
33906 Siasconset Rd, Windsor, CO 80550, United States
(970) 215-9106
…

When properly installed, insulation reduces the temperature difference between your attic and living spaces and provides year-round energy savings. This means that heating and cooling systems do not need to work as hard, which also reduces stress on mechanical equipment. The combination of lower energy consumption and reduced wear on your HVAC systems leads to substantial monetary savings over the years.

Spraytech Insulators can be made of a variety of materials, including fiberglass batts or rolls, mineral wool, and cellulose, which is recycled paper treated with fire retardants and blown into attics and walls as loose-fill insulation. The most common choice, fiberglass, is affordable and versatile, with different R-values depending on the thickness. For more specialized situations, such as the need for extra acoustic performance or to meet stringent fire codes, other options may be required.

Your Guide to Attic Insulation with Spraytech Professionals

Spray foam insulation is a highly effective insulator that comes in panels or boards that are cut to fit and then installed against attic floorboards or the attic framing. This type of insulation is durable, resists moisture absorption and mold growth, and has a high R-value per inch. However, this insulation type does have some downsides: it is more expensive than other types of attic insulation and requires professional installation, requiring the use of special equipment and safety training.

Whether you are installing attic insulation yourself or have hired a contractor, be sure to remove all boxes and other clutter from the attic prior to the installation of new insulation. Not only will this make it easier for the attic to be insulated, but it will also prevent air and water leaks from seeping into the living areas below. Also, be sure to wear a disposable coverall and safety glasses when working in an attic, and consider wearing kneepads to cushion your legs against attic joists and roof decking.

Spraytech Insulators
“N4310 Ebbe Acres Dr
Waupaca, WI 54981”
715-412-0571
…